Parallel-tuned Ferrite Toroid Crystal Radio

This is the toroid coil variant of my 'Ferrite Loopstick Crystal Radio'.

Parallel-tuned Ferrite Toroid Crystal Radio
A ferrite toroid, measuring OD 16.5mm, ID 10.5mm and H 10.5mm, is used. The coil is 25 turns of hook-up wire with a tap at 5 turns. On the primary side, a 200μH moulded inductor series-tunes the capacitive 60' long wire antenna to resonance at 612kHz (frequency of the lone 200kW local AM broadcast station). The secondary is parallel-tuned using a PVC gang condenser.

Parallel-tuned Ferrite Toroid Crystal Radio - Schematic
A small plastic trinket box serves as the enclosure. A screw-type terminal strip is used to connect antenna, earth and headphones.

Rear of Crystal Radio with Ferrite Toroid Coil
Reception, using sensitive balanced-armature headphones, is quite good. Headphone current, measured using a 1mA FSD 60 Ω meter, is 275 μA.

Related post: Parallel-tuned Air-core Coil Crystal Radio
_______________________________